- ​​Christmas pet Christmas clothingKitronik Linear Actuator Micro Servo Kit

Title Default Title
Qty:

Description

  • Kitronik Linear Actuator Micro Servo Kit
  • Features the blue, 180-degree FS90 servo and fixings
  • Has a gear ratio of 2:3
  • Can be used with boards such as micro:bit, Arduino, or RaspberryPi
  • Provides horizontal or vertical movement
  • Creates a torque of 1.5 kg/cm at 6 V / 1.3 kg/cm at 4.8 V

The Linear Actuator Servo Kit features a great value miniature Fitec servo and converts the circular movement of the supplied servo into movement in a straight line, one way and then the other. It is ideal for robots, dioramas or train points switching. It can be mounted to a project to provide either horizontal or vertical movement.

The Linear Actuator has been cut from a 5 mm clear blue Perspex Sheet, the same material as used in our servo powered Klaw gripper. There is a range of mounting holes at either end of the rack including a 3 mm hole, a 3 mm square, and standard servo horn holes suitable for wire (1 mm dia) and it has approximately 20 mm of travel. It has a gear ratio of 2:3 and the stall torque of the provided servo is 1.5 kg/cm at 6 V and 1.3 kg/cm at 4.8 V.

  • 1 x Linear Actuator Laser Cut Parts
  • 1 x Micro 180 Degree Servo and fixings
  • 2 x M3x 10 Pozi PanSteel M/C
  • 1 x M3 Form A Steel Washer
  • 1 x Linear Actuator assembly Instructions

Size

  • Length: 23.2 mm
  • Width: 12.5 mm
  • Height: 22 mm

  • Travel approx: 20 mm
  • Gear Ratio: 2:3
  • Movement: Horizontal and Vertical